Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Gladeview
Furnace repair in Gladeview typically runs $150 – $700, and most jobs are diagnosed the same day we arrive. If your heat won’t kick on during one of South Florida’s damp January cold snaps, call (850) 810-1910 and a live person answers, day or night. We know Gladeview’s homes: the closet air handlers off NW 79th Street, the rooftop wells off NW 22nd Avenue, and the concrete block construction that changes how heat moves through a house.
Victor Mancini leads our team at Cold Harbour Heating and Air Miami, and we’ve worked on more Gladeview furnaces with collapsed galvanized ductwork and 100-amp panels than we can count. Our Furnace Repair crew responds to Gladeview calls with the parts our older housing stock actually needs, not a generic truck stocked for the suburbs.
Why Cold Harbour Heating and Air Miami Is Gladeview’s Preferred Furnace Repair Company
Gladeview homeowners call us for the same reason they stop calling companies that put them on hold: we show up when we say we will, and the price we hand you before the first tool comes out is the price on the invoice. That written-price rule is part of The Kingswell Way, a set of standards we’ve followed since 2003 as an independently owned and operated member of the Kingswell network. No door-price changes. No “we found more once we opened it up” surprises.
Every one of our technicians is background-checked and uniformed, so the person at your door on NW 71st Street or NW 17th Avenue is who we said we’d send. We train on nine major residential HVAC brands including Carrier, Trane, Lennox, Daikin, and American Standard, which matters in Gladeview because plenty of these homes still run original or early-retrofit equipment that a younger tech might never have seen.
The 365-Day Done Right Promise is exactly what it sounds like. Every repair we make in Gladeview comes with a written guarantee good for one full year. If that repair fails inside 365 days, we come back and make it right at no charge. The guarantee is on paper before we leave your driveway, off NW 79th Street or anywhere else in the neighborhood. Victor has built the business around this since day one: write it down, honor it, answer the phone.
Styles & brands we work with
Heat Pump Repair in Gladeview
Heat Pump Repair in Gladeview means working on systems that were often retrofitted into 1950s-1970s concrete block homes where the original design never anticipated Florida’s year-round humidity or a heat pump’s electrical demands. A typical repair runs $150 – $650, parts and labor included. The job usually involves diagnosing the reversing valve, defrost board, or compressor contactor, then checking the air handler to confirm it’s actually moving enough air to keep the coil from freezing or overheating.
Reversing the Cycle in Tight Closet Installs
Many Gladeview heat pumps live in hall closets or rooftop wells where access means pulling a door off its hinges or working from a ladder. When the reversing valve sticks, your heat pump runs in AC mode while you’re asking for heat, and the strip heat tries to compensate. That’s a quick diagnosis for a trained tech, but real repair often means recovering refrigerant in a space the size of a linen closet. We’re used to it here.
Defrost Board and Strip Heat Failures
On damp Gladeview mornings in the 40s, heat pumps frost up, and the defrost board is supposed to clear it. When the board fails, you get cold air blowing while the outdoor unit turns into a block of ice. If your 1960s-era home still has its original electrical panel, the strip heat may trip the breaker instead of warming the house. Our techs check both the board and the panel’s capacity, because fixing one without checking the other strands you in the cold.
Heating Repair in Gladeview
Heating Repair in Gladeview covers gas furnaces, electric furnaces, and heat pumps, with most jobs landing between $150 and $700. For many of these homes, the furnace was converted from oil to gas in the 1980s, and the flue pipe clearance or intake placement no longer meets current code. When we open a closet off NW 22nd Avenue, we’re often looking at equipment that’s been modified twice and maintained rarely.
Gas Valve and Ignition Work
Ignition failures are common in converted Gladeview furnaces: the old flue pipe clearance is out of code, and a neighbor’s palm fronds can block the fresh-air intake. The fix may be a $150 – $280 ignitor replacement or a full gas valve job, depending on what the meter and flame sensor tell us. Either way, the diagnostic comes first, and the written price comes before any work starts.
Heat Exchanger Cracks in Starved Closet Installs
We find heat exchanger cracks on 20-year-old furnaces in closet installs where the louvered door was painted shut by a previous owner. The furnace starves for return air, runs hot, and the heat exchanger splits. That’s a genuine safety issue combined with carbon monoxide risk, and it’s why we recommend a trained professional handle heat exchanger inspection and repair. If the crack is beyond repair, we’ll tell you straight, flag any rebate-eligible replacement options, and help with the paperwork.
Trusted Brands We Service in Gladeview
Our techs arrive in Gladeview trained specifically on York, Daikin, Bryant, and American Standard equipment, along with Carrier, Trane, Lennox, Goodman, and Rheem. We stock common replacement parts that matter to Gladeview’s older stock: ignitors, flame sensors, capacitors, and defrost boards for the models these 1950s-1970s homes still run. That local parts knowledge means fewer return trips and quicker turnaround, whether your furnace is in a hall closet off NW 71st Street or a rooftop well with no shade in July.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Gladeview Homes
- Closet air handlers with painted-shut louvered doors. The return air can’t reach the blower, so the furnace runs hot and cycles on the limit switch. We see this on Gladeview’s older concrete block homes constantly, and the fix is often simpler than homeowners expect.
- Rooftop well installs with zero shade in July. Blower motors burn out early when the evaporator coil never gets cleaned because the air handler is a climb-and-crawl job. Technicians with less Gladeview experience may quote the replacement without touching what caused the failure.
- Original 100-amp electrical panels that can’t handle modern heat pumps. A new blower motor’s inrush can trip a breaker that was never designed for today’s equipment. We check the panel before we install, not after the furnace won’t start.
- Collapsed galvanized ductwork behind the walls. The 1950s-1970s ducting has reached the end of its life in many Gladeview homes, and the air handler is pushing against collapsed runs. That raises static pressure and shortens the motor’s life. We rebalance and repair duct runs as part of the job.
Pricing for Furnace Repair in Gladeview, FL
Here’s what we charge for the most common furnace repair calls in Gladeview:
| Service | Typical Range (Parts & Labor) |
|---|---|
| Furnace Repair | $150 – $700 |
| Heat Pump Repair | $150 – $650 |
| Heating Repair | $150 – $700 |
Ignitor replacements run $150 – $280, cap jobs $120 – $200, and full gas valve replacements are the high end at $550 – $700. What determines the final number: the part, whether we need a crane or lift for a rooftop well, and whether ductwork access requires opening a wall. You get the written price before any work begins, and it doesn’t change at the door. Call (850) 810-1910 for a free estimate. The team at Cold Harbour Heating and Air Miami coordinates dispatch from our South FL office and serves Gladeview with local crews. Dial, don’t click.
We Also Serve Cities Near Gladeview
Cold Harbour Heating and Air Miami serves Furnace Repair in Gladeview and the surrounding communities: Miami, Hialeah, Miami Beach, and Fountainebleau. If you’re a homeowner in one of these areas and your furnace is acting up on a damp January night, we answer the phone the same way: live person, real answers, written pricing.
Serving Gladeview, FL - Our Local Coverage Area
We’re based in the Gladeview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Gladeview
Short cycling in Gladeview’s concrete block homes usually means the furnace is hitting its limit switch because return air is starved, often by a painted-shut louvered door or collapsed ductwork behind the wall. Concrete block holds heat, so the space reaches temperature quickly, but the furnace should not be slamming on and off every few minutes. Call us at (850) 810-1910 for a diagnosis; it’s usually a $150 – $350 fix, not a replacement.
Yes, in most cases. Closet installs where the furnace shares space with the water heater are common in Gladeview’s 1950s-1970s homes, and we reconfigure the footprint and reroute the return air so both units function correctly. We may need to move the flue or adjust clearances to meet code, and the written price covers that work before we start. Call (850) 810-1910 and we’ll tell you honestly what fits.
Cold air with the strip heat running usually means the breaker tripped because the 100-amp panel in your 1960s home can’t handle the heat strips’ electrical draw, or the heat strips themselves have burned out. We check the panel, the sequencer, and the strips in one visit. If the panel needs an upgrade, we’ll walk you through it and quote it honestly before any work begins.
Yes, a brief burning-dust smell is normal the first time you run the furnace after a long Florida summer, because dust settles on the heat exchanger and burns off. The smell should clear within 20 – 30 minutes. If it persists, or you smell gas or something acrid, turn the system off at the thermostat and call us immediately at (850) 810-1910.
Carefully, and with the right equipment. Rooftop wells in Gladeview still exist on many of these older homes, and our techs use ladders, safety harnesses, and sometimes a lift to reach them. We diagnose the mechanical issue without needing a walkway, and we’ll let you know if the well itself is making the job dangerous. If it is, we’ll tell you before we cut or climb, and the price will reflect the access involved.
Call (850) 810-1910 for a free estimate on furnace repair in Gladeview. Victor Mancini and our team answer the phone live, 24 hours a day, 7 days a week. We’ll give you a real arrival window, a written price before work starts, and a 365-day guarantee in writing before we leave.
Written by Victor Mancini, Owner at Cold Harbour Heating and Air Miami, serving Gladeview and surrounding South Florida communities.